|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
Half round shape; has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic.
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers .
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
Rectangular shape, single cut on sides and edges, 2 square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut file pattern that are narrow chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, rectangular shape, tooth cuts deeper to last longer.
|
Plain horse rasps are double-ended with rasp teeth on one side, file teeth on opposite side, rectangular shape. Thin fine-toothed rasp for shoeing racetrack, riding horses and ponies.
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single cut file teeth on edge for use on wood and soft metals. Used by woodworkers, hobbyists and plumbers.
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
