Home > FARM & RANCH > FENCING > ELECTRIC FENCING & SUPPLIES > ELECTRIC FENCE INSULATORS
We found 37 results matching your criteria.
Sort By:
1
Zareba MP-1933 Electric Fence Insulators Zareba MP-1929 Electric Fence Insulators Fi-Shock ICY-FS Electric Fence Insulators
Small screw-in insulator. Large screw-in insulator. For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence.
Zareba ICRY-RS/YCP10 Standard Corner Post Insulator Zareba ICY-RS/YTRC10 Red SnapR Electric Fence Insulators Zareba HT4FT125/500-540T Electric Fence Insulators
Made of virgin, high impact polyethylene. To be used with lightweight smooth wire or Red Snap'r electric fence wire (install after insulator is attached to post). Fastener snaps open and shut for easier wire installation. Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire. Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
Fi-Shock ITY-FS Electric Fence Insulators Zareba IWNY-RS/YWP25N Electric Fence Insulators Fi-Shock ICDB-FS Electric Fence Insulators
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist. High strain corner and end insulator. For firmly securing and electrified wire to corner or end posts without losing energy through the post. Made for high tensile, permanent or temporary electric fences. Can withstand the strain of wire at corner or ends of electrified fences.
Zareba ITY-RS/YTP25N Red Snap'R Electric Fence Insulators Fi-Shock IT2XY-FS Electric Fence Insulators Zareba YRS25N Electric Fence Insulators
Designed to fit steel or 1.25 and 1.33 t-posts. Unbreakable snap-on mounts allow quick and easy installation. Use with all fence wire and poly rope. Two shields prevent arcing from wire to post. Ultraviolet stabilizers resist weathering. Not for use with poly tape or high tensile. For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist.
Zareba IWKNB-RS Red Snap'R Electric Fence Insulators Zareba IRY-RS Red Snap'R Electric Fence Insulators Fi-Shock IWKNY-FS Electric Fence Insulators
Made of virgin, high impact polyethylene. Fastens to post with nail, J-bolt or any type of fastener. Raised boss for easy removal of nail with claw hammer. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Provides long arcing distance protection from wire to post. Self-centering post cavity with spin-on nut will accommodate posts ranging from 1/4'' to 9/16'' diameter. For fastening electrified wire to wood  posts without losing energy through the post. Economical insulator with double-headed nail for wood posts. For 9 gauge thru 22 gauge high-tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter.
Fi-Shock MP-6 Electric Fence Insulators Fi-Shock IWNY-FS Electric Fence Insulators Fi-Shock ICLXY-FS Chain Link Insulator
Use to insulate wooden corner posts or end posts along wire fences. Durable porcelain and can be used with a variety of wire types, including steel wire, aluminum wire, poly rope and poly tape (not for use with high tensile). For fastening electrified wire to wood posts without losing energy through the post. Extends wire 2-1/2" from wooden posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Comes with a double headed nail. Fastens electrified wire to round or square post fence without losing energy through the post. Can be used on chain link fence.
INSULATOR CHAIN LINK YELO 10BG Fi-Shock IRY-FS* Electric Fence Insulators Zareba ICDY-Z/DC10 Electric Fence Insulators
Extends the wire 4" from the chain link fence. Heavy-duty brackets that clamp to a chain link fence. 10 yellow insulators per bag. For fastening electrified wire to posts without losing energy through the post. Screw-on insulators fits all posts 1/2" in diameter or smaller. Completely arc-proof. Designed for low impedance and standard duty fence controllers. Unbreakable polycarbonate 5,000 pound tensile strength vs 700 pound for porcelain. Will not chip, crack from stress, shortout or rust. Unique built-in wire channel keeps wire centered. Same size and dimension as porcelain corner. Use with any gauge wire or high tensile fences including barbed wire. U.V. protected to resist weathering.
Fi-Shock IT5XY-FS Electric Fence Insulators Fi-Shock ITPLY-FS Electric Fence Insulators Fi-Shock ITRXY-FS Electric Fence Insulators
For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post. Use for fastening or releasing an electrified wire to or from an electric fence T-post. Holds wire tightly. Release by pulling the pin. For 1.25 and 1.33 T-posts. Yellow. Bag of 25. Ideal when you need just a little more space between the wire and the post. Fits securely on standard (1.25 or 1.33) studded T-posts. Extends electrified wire 5" from the post. No hardware is needed to put this insulator on a post.
Zareba WP36/05820-96 Electric Fence Insulators Zareba ITCPY-RS/YSC10N Red SnapR Electric Fence Insulators Fi-Shock ITSOY-FS* Electric Fence Insulators
Dependable, strong, made from white vitreous porcelain and coated with a heavy glaze. 1-3/4'' diameter. Made of virgin, high impact polyethylene. Maximum protection for horses, show cattle or any livestock from sharp, jagged T-Post top. Fits T-post 133's, 125's and 101's; also fits all size wood posts. For fastening an electrified wire to a post without losing energy through the post. Screw on insulator ensures a tight, secure fit on standard (1.25 or 1.33) studded T-post. Eliminates dislodging in high winds or under heavy loads.
Fi-Shock IW5XNY-FS Electric Fence Insulators Zareba IT5XY-RS/YTPX25N Red Snap'R Electric Fence Insulators Zareba IW5XNY-RS/YWPX25N Electric Fence Insulators
Use for extending wire 5" from wooden posts. Fastens electrified wire to wooden post without losing energy through the post. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4" in diameter. Yellow. Bag of 25. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Easy installation with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Features Red Snap'r unbreakable, snap-on/snap-off fastening attachment which accommodates standard size 1.25 and 1.33 t-posts. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist.
Zareba MP-5E Electric Fence Insulators Zareba ICLY-RS/YCX25 Red Snap'R Electric Fence Insulators Zareba WP-5E/07089-96 Electric Fence Insulators
For wood-post with washer and double headed nail. Made of virgin, high impact polyethylene. Springs spread apart to clamp on chain link fence to keep livestock away. Dependable, strong, made from white vitreous porcelain and coated with a heavy glaze. Accessories include No.07092-96 Double Headed 3-1/2" Nail and Washer and No.07093-96 Plastic Washer. 1-7/8" diameter.
Fi-Shock IUCLXY-FS Extension Bracket Insulator Fishock HT20WAI10/500-541 Wraparound Insulator PLP ITDE-18-125-14 Insulated T-Post Dead End
Fastens electrified wire to round or square post fence without losing energy through the post. Can be used on chain link fence. Extends wire 6" from post. Used for tying off electric wires at end and gate posts. Made of non-conductive polyethylene with an aluminum insert for strength. For 18 gauge barbed wire/12.5 gauge smooth wire/14 gauge smoothe wire. Bracing solution for electric fence systems using t-posts and regular posts. Insulates the electric fence wire from the grounded post. Ideal in insulated and non-insulated fencing terminations. No special tools or accessories needed. Simple hand weave installation with smooth rigid fit. Safe and strong for animal containment. Manufactured from tough galvanized steel (Class 3 or above).
PLP IPDE-18-125-14 Insulated Post Dead End
For 18 gauge barbed wire/12.5 smooth gauge wire/14 gauge smooth wire. Bracing solution for electric fence systems using t-posts and regular posts. Insulates the electric fence wire from the grounded post. Ideal in insulated and non-insulated fencing terminations. No special tools or accessories needed. Simple hand weave installation with smooth rigid fit. Safe and strong for animal containment. Manufactured from tough galvanized steel (Class 3 or above).
   
 
1