Home > FARM & RANCH > FENCING > ELECTRIC FENCING & SUPPLIES
We found 150 results matching your criteria.
Choose a sub category:
ELECTRIC FENCE WIRE ELECTRIC FENCE POLY WIRE /ROPE ELECTRIC FENCE POLY TAPE
ELECTRIC FENCE CABLE FENCE CHARGERS - ELECTRIC FENCE CHARGERS - SOLAR
FENCE CHARGERS - BATTERY ELECTRIC FENCE INSULATORS ELECTRIC FENCE POLY INSULATORS
ELECTRIC FENCE POLY CONNECTORS ELECTRIC FENCE POSTS ELECTRIC FENCE KITS
ELECTRIC FENCE ACCESSORIES PET CONTAINMENT FENCING KITS PET CONTAINMENT ACCESSORIES
Sort By:
1 2 3
Zareba MP-1933 Electric Fence Insulators Zareba MP-1929 Electric Fence Insulators Fi-Shock GHPO-FS Electric Fence Gate Handles
Small screw-in insulator. Large screw-in insulator. Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
Fi-Shock PAHTS-FS Polytape Splicer GROUND CLAMP HEAVY DUTY 10/CS Fishock A-48B Fence Post
For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice. For a secure connection between ground wire and ground rod. Heavy duty construction. Made of aluminum; will not rust. For use with 5/8" and larger ground rods. 1 clamp per pack. Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders.
Fishock A-48 Step-In Fence Post Fi-Shock ICY-FS Electric Fence Insulators Zareba ICRY-RS/YCP10 Standard Corner Post Insulator
Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake. For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence. Made of virgin, high impact polyethylene. To be used with lightweight smooth wire or Red Snap'r electric fence wire (install after insulator is attached to post). Fastener snaps open and shut for easier wire installation.
Zareba ICY-RS/YTRC10 Red SnapR Electric Fence Insulators Fi-Shock WC-100 Fence Wire Fi-Shock PARS-FS Polyrope Connector
Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire. 125 to 145 Breaking Load Limit. For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger.
Fi-Shock PAHTE-FS Polytape End Connector Zareba HT4FT125/500-540T Electric Fence Insulators Fi-Shock AWPA-FS Electric Fence Gate Handle Anchors
Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections. Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene. Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
Fi-Shock GHRY-FS Electric Fence Gate Handles Parker Mccrory 716 Step-In Posts Fi-Shock PA1TS-FS Polytape Buckle Splicer
Use with fence wire and polyrope. Insulates against shock. Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight. Connects 1" polytape to the end insulators to reach all of your fence posts.
Fi-Shock ITY-FS Electric Fence Insulators Fi-Shock PATE-FS Polytape to Energizer Connector Zareba HTTT/300-309 Electric Fence Wire Bending Tool
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible.  Connects the polytape to the energizer. Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
Fi-Shock ATPA-FS Electric Fence Gate Handle Anchors Fi-Shock ICDB-FS Electric Fence Insulators Zareba WS3 Warning Sign
For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts. High strain corner and end insulator. For firmly securing and electrified wire to corner or end posts without losing energy through the post. Made for high tensile, permanent or temporary electric fences. Can withstand the strain of wire at corner or ends of electrified fences. Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
Fi-Shock PA2TS-FS Polytape Splicer Zareba A1LVT-Z Electric Fence Tester Fi-Shock PATT-FS Polytape To Polytape Connector
Connects 2" polytape to the end insulators to reach all of your fence posts. Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord. For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode.
Fi-Shock FW-00018D Electric Fence Wire Fi-Shock PAWPC-FS Electric Fence Insulators Fi-Shock IT2XY-FS Electric Fence Insulators
90 Pound Breaking Load Limit. Lightweight. Rust-proof. For insulating corner wood posts that have polytape. Made for all poly tape widths up to 2". For standard T-posts (1.25 and 1.33). Use at corners, ends or T-junctions. Fully insulated. All metal parts are stainless steel. Molded of high density polyethylene with UV inhibitors. For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post.
Fi-Shock PATPC-FS T-Post Polytape Corner Insulator Zareba IWKNB-RS Red Snap'R Electric Fence Insulators Fi-Shock A-12T Warning Sign
For insulating corners, ends or T junctions of T-posts that have polytape. For all polytape widths up to 2" or standard T-posts (1.25 and 1.33). Molded of white high density polyethylene with UV inhibitors. Made of virgin, high impact polyethylene. Fastens to post with nail, J-bolt or any type of fastener. Raised boss for easy removal of nail with claw hammer. Two holes in top for fastening to fence wire, or for nailing to wood post. Weighs 0.04 pounds each.
Fi-Shock GHHDB-FS Electric Fence Gate Handles Zareba ILS1/400-400CC Electric Fence Strainer Fi-Shock ACOS-FS Cutout Switch
Insulating grip is soft and flexible with safety flanges for extra shock protection. Unique fastening plate ensures a secure wire connection. Will not break, crack, or chip. Steel components are plated to resist rust. Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel. Switch off selected electric wires on a fence, such as the lowest live wire when the grass is high, to prevent interference with the fence.
Fi-Shock IWKNY-FS Electric Fence Insulators Fishock HTPSCLIP/400-430T Multi Groove Spacer Clip Fi-Shock MP-6 Electric Fence Insulators
For fastening electrified wire to wood  posts without losing energy through the post. Economical insulator with double-headed nail for wood posts. For 9 gauge thru 22 gauge high-tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Galvanized clip for poly and wood spacers. Use with 3-hole twisting tool No.300.309 (SKU 573-8687) to attach spacer tightly to high tensile wire. Use to insulate wooden corner posts or end posts along wire fences. Durable porcelain and can be used with a variety of wire types, including steel wire, aluminum wire, poly rope and poly tape (not for use with high tensile).
Fi-Shock IWNY-FS Electric Fence Insulators Fishock HTBP5/400-402T High Tensile Extension Brace Pin Fi-Shock ITCPY-FS Electric Fence Insulators
For fastening electrified wire to wood posts without losing energy through the post. Extends wire 2-1/2" from wooden posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Comes with a double headed nail. Used with 6" x 8' posts in each single or double brace assembly. Made of 3/8" carbon steel rods and galvanized. For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts.
Fi-Shock ITCPW-FS T-Post Safety Cap & Insulator Zareba HTBP10/400-403T High-Tensile Brace Pins Fi-Shock ICLXY-FS Chain Link Insulator
For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts. Has same features as 5" pin but is used with 5" x 8' post in single brace and one each with 5" x 8' post and 4" x 8' post in double brace assembly. Made of 3/8" carbon steel rods and galvanized. Fastens electrified wire to round or square post fence without losing energy through the post. Can be used on chain link fence.
INSULATOR CHAIN LINK YELO 10BG SWITCH CUTOUT 6 PER CARTON    Fi-Shock 300-305 Electric Fence Strainer Handle
Extends the wire 4" from the chain link fence. Heavy-duty brackets that clamp to a chain link fence. 10 yellow insulators per bag. Switches off selected electric wires on an electric fence. Handle protects contacts. All stainless steel hardware. Made of hot rolled flat steel formed to fit the in-line strainer No.400-399. Durable paint finish to prevent rust.
Zareba ITTY-RS/YPT25TP Red SnapR Electric Fence Insulators Fi-Shock ITTY-FS Electric Fence Insulators Fi-Shock ITTW-FS Screw-On T-Post Insulator
Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 t-posts. Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width, wire and poly wire. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 T-posts. Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width, wire and poly wire. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 T-posts.
Fi-Shock 301-404 Time Delay Fuse Fishock HTWT/500-560T Electric Tap Fi-Shock 200-260 Multi-Groove Poly Spacer
1/16 amp fuse used in model Nos.EAC5A-FS, SS-750RPX and EAC10M-FS (SS-550X). Used to secure, by crimping, hot wire connections to existing wires. Also for use under gate electric transfer. Fits 12-1/2 to 16 gauge wire. Made of high-density polyethylene, UV stabilized, notched every inch. Attach to wire with spacer clip. 49" long.
Fi-Shock IRY-FS* Electric Fence Insulators Zareba ICDY-Z/DC10 Electric Fence Insulators Zareba IWTNY-RS/YPT25WP Red SnapR Electric Fence Insulators
For fastening electrified wire to posts without losing energy through the post. Screw-on insulators fits all posts 1/2" in diameter or smaller. Completely arc-proof. Designed for low impedance and standard duty fence controllers. Unbreakable polycarbonate 5,000 pound tensile strength vs 700 pound for porcelain. Will not chip, crack from stress, shortout or rust. Unique built-in wire channel keeps wire centered. Same size and dimension as porcelain corner. Use with any gauge wire or high tensile fences including barbed wire. U.V. protected to resist weathering. Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 1-1/2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. One nail installation. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist.
Fi-Shock IT5XY-FS Electric Fence Insulators Fi-Shock ITPLY-FS Electric Fence Insulators Parker Mccrory 719 Rod Post Clips
For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post. Use for fastening or releasing an electrified wire to or from an electric fence T-post. Holds wire tightly. Release by pulling the pin. For 1.25 and 1.33 T-posts. Yellow. Bag of 25. Stainless steel spring clip for 3/8" and 1/2" fiberglass rod posts. Will not rust or corrode. Safely and securely attach electrified wire or poly wire to fiberglass or rod posts. Bag of 20 clips.
   
 
1 2 3