Home > ELECTRICAL > SPECIALTY ELECTRICAL > AUDIO & VIDEO SUPPLIES > TV WIRE/CABLE FITTINGS
We found 28 results matching your criteria.
Sort By:
1
Cooper 1172V Type F Wall Jack Cooper 1172W Type F Wall Jack Zenith VA1002RG6CR Type F Coaxial Connector
For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.
Zenith VA1002RG6FT Type F Coaxial Connector Zenith VA1002RG6TW Type F Coaxial Connector American Tack and Hdwe VM1002RG6BU Zenith Coaxial Bushings
Connects two coaxial cables. .75" height x .5" width x .5" depth. Connects to coax cable without tools. .75" height x .5" width x .5" depth. Allows coax cable to feed through wall an internal or external wall. 1.17" height x 1.17" width x 1.17" depth.
Zenith VA1001RG6QP Type F Coaxial Adapter Zenith VA1001RG6RA Type F Coaxial Connector Zenith VS1001SP2W 2-Way Coaxial Splitter
Allows quick connect and disconnect of coax cable. .87" height x .5" width x .5" depth. For use in hard to reach spaces. Repositions cable jack for easy access. Plug and play. .87" height x .67" width x .37" depth. Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into two. 1.25" height x 2" width x 0.5" depth.
Gardner Bender PEC-31525 Coaxial Cable Clamp Zenith VW1001WJ2W Dual Type F Wall Jack Zenith VW1001WJ2A Dual Type F Wall Jack
Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2". Connects two 75 ohm coax cables through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects two 75 ohm coax cables through a wall. 4.5" height x 2.75" width x 0.75" depth.
Zenith VW1001WJ1A Type F Wall Jack Zenith VW1001WJ1W Type F Wall Jack American Tack and Hdwe VR1001SW2W Zenith A/B Switches
Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth. Manually switch between two coax input sources to one TV such as antenna or cable. 2.37" height x 2.87" width x 0.75" depth.
Zenith VA1010RG6TW Type F Coaxial Connector Zenith VS1001SP3W 3-Way Coaxial Splitter Gardner Bender F GDC-6CM Compression Connector
Connects to coax cable without tools. .75" height x .5" width x .5" depth. Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into three. 1.75" height x 2.75" width x 0.5" depth. For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.
Zenith VS1001SP4W 4-Way Coaxial Splitter Zenith VA1010RG6CR Type F Coaxial Connector Zenith VS3001SP2W 2-Way Coaxial Splitter
Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into four. 1.75" height x 2.75" width x 0.5" depth. Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth. Splits one coax cable signal into two. 24K gold connectors. 5-2400MHz. 2" height x 2" width x 0.75" depth.
Gardner Bender F ITC-RG-6 Tool-Less Connector Gardner Bender GDC-3W2G 3-Way Satellite/Digital TV Splitter Gardner Bender F GDC-FAM Coaxial Connector
Strip the cable, fold braid back and push into ITC connector. PCB printed circuit board design, nickel plated housing. 5 MHz - 1 GHz bandwidth, 75 Ohm impedance, low insertion loss, over 120 dB of RFI shielding. Splits one signal into three. Combine two RG-6 lengths of coaxial cable or connect cables through a wall.
Zenith VS3001SP4W 4-Way Coaxial Splitter Gardner Bender F ITC-RG-6C Tool-Less Connector Gardner Bender F GDC-6C Compression Connector
Splits one coax cable signal into four. 24K gold connectors. Quad Shield video accessory. Four layers of premium shielding to prevent signal interference. 5-2400MHz. 2" height x 3" width x 0.75" depth. Strip the cable, fold braid back and push into ITC connector. For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.
GB-Gardner Bender DTK-1000 Coax Installation Kits
Includes cutter, stripper, compression tool, and includes compression "F" connectors GC-330, COM-310, SE-398  and GDC-6C in a custom molded pouch with a belt clip.
   
 
1