Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS
We found 196 results matching your criteria.
Choose a sub category:
FISH TAPES CONDUIT BENDERS WIRE STRIPPERS & CRIMPING TOOL
CIRCUIT/VOLTAGE TESTERS FUSE PULLERS LIGHT BULB CHANGERS
ALLIGATOR CLIPS GREENLEE SPECIALTY TOOLS/ACCES MISC TOOLS & ACCESSORIES
Sort By:
1 2 3 4
GB-Gardner Bender 14-078 Alligator Clips Romex CR-100 Cable Ripper/Stripper GB-Gardner Bender 14-075 Alligator Clips
For home, auto and marine applications. Tool slits romex and other non-metallic cable, checks wire gauge 6 to 14. For home, auto and marine applications.
GB-Gardner Bender 14-076 Alligator Clips GB-Gardner Bender 14-077 Alligator Clips Gardner Bender GET-3100 Voltage Tester
For home, auto and marine applications. For home and auto applications. Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions.
Bussmann HEF-1 Assortment Fuse Kit Gardner Bender 42-ALPH Alphabet Circuit Breaker Wire Marker Book Gardner Bender RTL-108 Replacement Medium Test Lead
Contains 2 - 1A, 1 - 2A and 2 - 3A glass tube AGC fuses. Adhesive backed cloth strips attach to inside of circuit breaker box to label all household circuitry. Book contains two pages, or a total of 90 marker strips. Carded. Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS Plastic. Flexible cords for easy use.
Gardner Bender 14-630 Battery Clamp Cooper BP914 Circuit Tester Gardner Bender GET-3202 Low Voltage Voltage Tester
For battery, battery charger and testing equipment applications. Copper clad clamps. Handle grips are insulated and color-coded for positive (red) and negative (black) identification. For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
Bussmann HEF Fuse Kit Toolbasix JL-SST-401183L Cable Crimper Wire-Aide 79-006N Non-Toxic Wire Pulling Lubricant
MDL-1/2, 1, 2; GDC-1, 2. Cuts and strip wires, crimps ignition terminals. Easy-to-read wire size markings. Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim; cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL Listed.
Milwaukee Clipper GS-40 Adjustable Wire Cutter/Stripper Cooper G-TOOL-L Multi-Gang Installation Tool Gardner Bender GTPS-3100 Cable Stripper
Includes spring return and lock. Adjustable, hardened spring steel. Strips 10-24 gauge wire. Helps to align multigang installations of 2 gangs or more. Wall plate fits without additional adjustment. Adjusts to any combination of toggle, decorator and duplex. Built-in bulb level. Strips UTP and STP cable up to .24" (6.2mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
GB CR-1000 Cable Ripper Gardner Bender GRT-3500 Outlet Tester Gardner Bender GET-213HV High Visibility Dual Indicator Voltage Tester
GB Cable Ripper, Premium, 14 - 6 AWG Cable/Wire, 4 in Overall Length, cULus Listed, For Use to Cut Off Cable Jacket Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors. Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed.
Gardner Bender GET-3213 3-Range Voltage Tester GB-Gardner Bender CT6101 Continuity Testers GB SK-832T Electrician's Screw Kit
Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed. Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included). GB Screw Kit, Electrician's, 120 Pieces, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in and  (20) 2 in  Phillips Head Screws, NO 8-32 Phillips Round Head, For Switches, Receptacles and Outlet Applications
GB-Gardner Bender LNW-500 Locknut Wrenches Gardner Bender GFI-3501 Manual Outlet Tester Gardner Bender GS-386 Diagonal Cutting Plier
Fits the majority of UL locknuts. Etched markings allow for easy identification, clearly marked tighten and loosen ends. Thin design allows easy maneuvering in tight locations. Durable steel construction. Hooked tip latches onto locknut and maximizes turning leverage. Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded. Tapered nose allows cutting in tight locations. Dual cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
GB-Gardner Bender LNW-750 Locknut Wrenches Greenlee DTAP1/4-20 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP8-32 Right Hand Drill/Tap/Countersink Bit
Fits the majority of UL locknuts. Etched markings allow for easy identification, clearly marked tighten and loosen ends. Thin design allows easy maneuvering in tight locations. Durable steel construction. Hooked tip latches onto locknut and maximizes turning leverage. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP10-32 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP12-24 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP10-24 Right Hand Drill/Tap/Countersink Bit
Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill. Designed to tap up to 10 gauge metal. Back taper or deburr/countersink beyond tap to prevent thread damage from over-drilling.
Gardner Bender GCT-3304 Low Voltage Twin Probe  Continuity Tester Gardner Bender GS-366 Cable Crimper/Stripper GB-Gardner Bender LNW-1000 Locknut Wrenches
Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included. Strips cable, 10-22 AWG wire, crimps terminals and cuts bolts. Easy-to-read wire size markings. Fits the majority of UL locknuts. Etched markings allow for easy identification, clearly marked tighten and loosen ends. Thin design allows easy maneuvering in tight locations. Durable steel construction. Hooked tip latches onto locknut and maximizes turning leverage.
Gardner Bender GCV-3206 Low Voltage Twin Probe Continuity Tester Greenlee 60A-3/4 Stubby Quick Change Auger Bit Gardner Bender GS-387 Linemans Plier
Test continuity without wire probes on non-energized circuits. Tests AC/DC voltage from 12 to 250 volts on energized circuits. Glows when voltage or continuity exists. Uses 2 button batteries, included. UL Listed. Carded. Shorter for better access to tight spaces between studs and joists, will drill 2' and 4' joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5" (144mm) weight .3 lb. (118g). 1/4" hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails. Side-cutting pliers. Comfort-grip handles. Cuts copper or aluminum wire. Serrated, square tip jaw for extra grip on bolts.
Gardner Bender GAT-3400 Automotive Circuit Tester Smart 3002 Bulb Changer Kit Gardner Bender GS-385 Multi-Function Long Nose Plier
Used to test DC voltage in automotive applications. Features 3' test lead with alligator clamp and 360 degree bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required. Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA. Multi-function long nose pliers cut, strip and crimp. Use needle nose to form wire or grip small parts. Strips number 14 - number 16 AWG solid or stranded wire. Crimps insulated terminals up to number 10 AWG. Cuts solid or stranded wire. Serrated jaw and cushioned grips.
Greenlee 1941-1 Cutter Blade Greenlee 84012 Conical Anchor Kit Bussmann Fuses BP/FP-2 Fuse Pullers
Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter. Contains 100 anchors, 100 screws and a 1/4" masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use. Heavy-duty tool for safely removing cartridge fuses from their blocks.
Gardner Bender GS-45 Adjustable Wire Cutter/Stripper Mintcraft CP-C8153L Multi Function Wire Stripper Gardner Bender GBT-3502 Battery Tester
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling. Rust-resistant steel with cushioned vinyl grip. Easy-to-read wire size markings. LOW/GOOD indicator. Movable contact arm to fit AA, AAA, C, D, 9 Volt and 1.5 volt button cells.
Gardner Bender GS-388 Light Duty Crimping Plier Smart 3001 Bulb Changer Kit Gardner Bender TT-10B Electrician 3-In-1 Tapping and Rethreading Tool
Crimp insulated or non-insulated terminals. Tapered nose for cutting in tight locations. Cuts copper and aluminum wire. Cushioned grips. Carded. Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA. Top grade Rockwell 60 steel. Fits tap sizes 6-32, 8-32 and 10-24. Unclogs screw holes, retaps stripped holes.
Gardner Bender GS-89 Cable Cutter/Crimper GB-Gardner Bender TT6200L Telephone Line Testers Gardner Bender GK-4 Electrical Tool/Tester Set
For high-leverage. Cuts up to 3/8" diameter cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips. For common problem conditions with standard single or dual-line telephone hook-ups. Compact, plugs into any single or dual-line telephone jack. Can be read from any angle. Green means line is OK, red - reversed line, amber  - AC voltage present, not lit - dead line. Contains the most common wiring tools and a voltage tester. Includes one No.GS-67 multi-function crimper/stripper, one No.CR-100 cable ripper and one GET-102  90-300 volt AC/DC circuit tester.
Gardner Bender GBT-500A Full Function Battery Tester Calterm 66212 Streamline Wire Stripper Gardner Bender GVD-3504 Non Contact Voltage Tester
Checks if battery is charged or needs replacing. Tests from 1.5 volt button cells to 22.5 volt photo and lantern cells. Tests condition of nickel-cadmium rechargeable batteries. Cushion grip wire handles. Strips and cuts. Plier nose for pulling and looping wire. Spring return and safety lock. Tests from 50-600 volt AC. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature to assure batteries are operating properly. Compact design with pocket clip to fit in shirt pocket. Uses 1 AAA battery, not included. UL Listed.
GB-Gardner Bender CAM-10 Circuit Alert Voltage Testers Gardner Bender GS-355 Wire Stripper Cable Snake EFT-321P Flat Wire Fish Tape
Detects AC voltage without contacting live wires. For indoor use. Tri-directional momentary On/Off switch. Uses 2 LR44 button cell batteries, included. 50-600 volts AC, 50-60 Hz operating range. Audible and visual alert. Includes snap-on pocket clip. UL Listed. Strips solid or stranded wire 10 - 20 AWG. Precision stripping stations. Laser-etched markings. Pliers nose and curved cutting blade aid in pulling and cutting wire. Spring-loaded action returns handles to open position. Curved high-leverage handles for added comfort. Looping hole forms wire to fit on screw terminal. For short runs installing electrical boxes, outlets, lighting fixtures, doorbells and security systems. Compact design fits in tool box or on tool belt. Flat wire steel tape fishes down walls, under carpets and over ceilings. Wedge-shaped tip prevents hang-up. Low-memory tape does not curl during extension. Formed handle. Compact tape rewind knob for quick wind-up. 1.10 pounds.
   
 
1 2 3 4