Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > MISC WIRING CONNECTORS
We found 12 results matching your criteria.
Sort By:
1
Calterm 61606 Terminal Lug Calterm 61607 Terminal Lug GB-Gardner Bender GSP-04 Quick Fix Receptacle Spacers
Dimensions: 3/8" stud x 2-3/8" length. Dimensions: 3/8" stud x 2-3/8" length. Adjusts depth of receptacles and switches to allow proper fit of trim plate.
SPACERS TWIST-APART 24STRIP4IN Gardner Bender HST-WP Butt Splice Kit Gardner Bender HSB-28 Butt Splice Kit
Adjusts depth of receptacles and switches to allow proper fit of trim plate. For waterproof repair of well pipe cables and splices of stranded cable #8-#14 AWG. Connector set screws engage each wire securely for a solid splice. Rated 600 volt maximum. Contains 1 screw splice connector, 1 4" heavy polyolefin shrink tube with watertight adhesive liner. For waterproof installation or repair of #2 - #8 AWG copper cable. Seal with heat gun or torch. Rated 600 volt maximum. Contains 1 screw splice connector, 1 4" heavy polyolefin shrink tube with watertight adhesive liner.
Gardner Bender 42-035 Pocket-Sized Wire Markers Booklet Halex 62899 Nail Plate GB-Gardner Bender EVK-002 Electrical Kits
Pocket-sized booklets of cloth wire markers and matching terminal markers. Also has extra page of blank write-on wire and terminal markers for special legends. Vinyl-impregnated cloth resists moisture, dirt, oil. Non-smear legends assure high visibility. Use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4 All items are in a quick, grab and go container, no need to search. Have all the essentials of an electrical project in one place. 102 piece kit, comes with 25 yellow, 25 red wire connectors, 50 1/2" NM plastic staples, 1 roll black electrical tape and 1 electrical tester.
Halex 51063 Wedge Clamp Connector GB-Gardner Bender EVK-003 Electrical Kits Halex 62850 Nail Plate
For NM (Romex) cable and SE cable. Aluminum wedge and shell, with stainless steel bail. Indoor or outdoor applications. Use to connect a triplex overhead service entrance cable to a mounting device on a building. Bulk packed. All items are in a quick, grab and go container, no need to search. Have all the essentials of an electrical project in one place. 304 piece kit comes with 25 yellow, 25 red wire connectors, 50 1/2" NM plastic staples, 100 8" 50lb, 100 6" 40lb single lock cable ties, 1 roll black electrical tape and 1 electrical tester, wire stripper and cable ripper. Use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4
   
 
1