Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > WIRENUTS / CONNECTORS
We found 77 results matching your criteria.
Sort By:
1 2
WireGard 19-AWC Assortment Wire Connector Kit, 9 Pieces, 600 V WireGard 19-001 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Gray WireGard 19-002 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Blue
Our Price: $1.44
Our Price: $1.44
Our Price: $1.44
WireGard 19-AWC Assortment Wire Connector Kit WireGard 19-001 Twist-On Wire Connector WireGard 19-002 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-003 Twist-On Wire Connector, 22 - 14 AWG, 300 V, 600 V, Thermoplastic, Orange WireGard 19-004 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow WireGard 19-006 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Red
Our Price: $1.44
Our Price: $1.44
Our Price: $1.44
WireGard 19-003 Twist-On Wire Connector WireGard 19-004 Twist-On Wire Connector WireGard 19-006 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WingGard 19-084 Twist-On Wire Connector, 22 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow WingGard 19-086 Twist-On Wire Connector, 22 - 6 AWG, 300 V, 600 V, Thermoplastic, Red Hex-Lok 19-2H2 Hex Lock Universal Wire Connector, 14 - 6 AWG, 600/1000 V, Thermoplastic, Gray
Our Price: $1.44
Our Price: $1.44
Our Price: $1.44
WingGard 19-084 Twist-On Wire Connector WingGard 19-086 Twist-On Wire Connector Hex-Lok 19-2H2 Hex Lock Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WingGard 19-089 Twist-On Wire Connector, 14 - 6 AWG, 300 V, 600 V, Thermoplastic, Blue GreenGard 19-095 Grounding Wire Connector, 14 - 10 SOL, Thermoplastic, Green Calterm 61470 Assortment Wire Cap Set
Our Price: $1.44
Our Price: $1.44
Our Price: $2.20
WingGard 19-089 Twist-On Wire Connector GreenGard 19-095 Grounding Wire Connector Calterm 61470 Assortment Wire Cap Set
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. Suitable for solid or stranded copper wire.
WireGard 25-002 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Blue WireGard 25-001 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Gray Hex-Lok 19-1H1 Hex Lock Universal Wire Connector, 22 - 8 AWG, 600/1000 V, Thermoplastic, Tan
Our Price: $2.24
Our Price: $2.27
Our Price: $2.31
WireGard 25-002 Twist-On Wire Connector WireGard 25-001 Twist-On Wire Connector Hex-Lok 19-1H1 Hex Lock Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs.
WireGard 25-003 Twist-On Wire Connector, 22 - 14 AWG, 300 V, 600 V, Thermoplastic, Orange Gardner Bender 20-089 Closed End Crimp Pigtail Connector, 22 - 14 AWG, Nylon Gardner Bender 20-090 Closed End Crimp Pigtail Connector, 22 - 10 AWG, Nylon
Our Price: $2.49
Our Price: $2.49
Our Price: $2.51
WireGard 25-003 Twist-On Wire Connector Gardner Bender 20-089 Closed End Crimp Pigtail Connector Gardner Bender 20-090 Closed End Crimp Pigtail Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed.
PushGard 19-PC2 2-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Red/Clear PushGard 19-PC3 3-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Orange/Clear WingGard 25-084 Twist-On Wire Connector, 18 - 12 AWG, 300 V, 600 V, Thermoplastic, Yellow
Our Price: $2.89
Our Price: $3.09
Our Price: $3.18
PushGard 19-PC2 2-Port Push-In Connector PushGard 19-PC3 3-Port Push-In Connector WingGard 25-084 Twist-On Wire Connector
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
PushGard 19-PC4 4-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Yellow/Clear WireGard 25-004 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow Gardner Bender TK-32 Assortment Wire Connector Kit, 32 Pieces, 22 - 10 AWG
Our Price: $3.24
Our Price: $3.29
Our Price: $3.42
PushGard 19-PC4 4-Port Push-In Connector WireGard 25-004 Twist-On Wire Connector Gardner Bender TK-32 Assortment Wire Connector Kit
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Slide card kit with 32 assorted wire connectors: 10 GB #1 - minimum 3 #22 maximum 2 #16, 8 GB #2 - minimum 3 #22 maximum 3 #18 w/2 #20 6 GB #3 - minimum 3 #20 maximum 2 #14, 2 GB #4 - minimum 1 #14 maximum 4 #12, 4 crimp connector #1035 - 1 #20 w/1 #12 - 2 #14, 2 crimp connector #1034 - 4 #22 - 2 #16.
WingGard 25-086 Twist-On Wire Connector, 14 - 12 AWG, 300 V, 600 V, Thermoplastic, Red Gardner Bender 10-100 Tap Splice, 16 - 14 AWG, 600 V DryConn 20101 Low Voltage Wire Connector, 22 - 6 AWG, 30 V, Tan
Our Price: $3.67
Our Price: $3.76
Our Price: $3.96
WingGard 25-086 Twist-On Wire Connector Gardner Bender 10-100 Tap Splice DryConn 20101 Low Voltage Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. For snap-in splicing of low-voltage AWG wire without prior stripping. 75 degree Celsius temperature rating. Clamshell. Suitable for all low voltage applications. For use in lighting, irrigation, and underground wiring. No junction box required. Filled with petroleum based sealant. 30 volt/10 amps maximum. 13/16" x 19/16".
DryConn 62210 Safety Sealed Waterproof Wire Connector, 22 - 8 AWG, 600/1000 V, Aqua/Blue DryConn 62110 Safety Sealed Waterproof Wire Connector, 22 - 12 AWG, 600/1000 V, Aqua/Orange DryConn 62310 Safety Sealed Waterproof Wire Connector, 14 - 6 AWG, 600/1000 V, Aqua/Red
Our Price: $3.98
Our Price: $3.98
Our Price: $3.98
DryConn 62210 Safety Sealed Waterproof Wire Connector DryConn 62110 Safety Sealed Waterproof Wire Connector DryConn 62310 Safety Sealed Waterproof Wire Connector
Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL 486D Listed. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL 486D Listed. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL 486D Listed.
Mintcraft CP-323L Wire Cap Set, 32 Pieces DryConn 10600 Twist-On Underground Wire Connector, 22 - 8 AWG, 600/1000 V, Blue WireGard 25-AWC Assortment Wire Connector Kit, 25 Pieces, 600 V
Our Price: $4.09
Our Price: $4.27
Our Price: $4.33
Mintcraft CP-323L Wire Cap Set DryConn 10600 Twist-On Underground Wire Connector WireGard 25-AWC Assortment Wire Connector Kit
Thirty two piece, for AWG #24 to AWG #10 solid or standard copper wire. Contains: 10 pc wire joint 22-16  300 volt, 2/#22 - 2/#16. 8 piece wire joint 22-14 300 volt 3/#22 - 3/#16. 6 pc wire joint 22-14 600 volt 2/#18 - 4/#16. 2 piece wire joint 18-12 600 volt 1/#18 + #14 - 1 and 2/#14 + 3/#16. 4 piece closed end pigtail 16-14 2/#22 - 2/#14. 2 piece closed end pigtail 12-10 2/#18 - 2/#10. Rated for all underground direct bury applications. Use on all lighting, irrigation, and underground wiring. Additional sealant for long term service. No junction box needed. 600 volt maximum with building wire, 1000 volt in fixtures and signs. #8 to #22 wire range. UL 486D Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 25-006 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Red PushGard 19-PC8 8-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Black/Clear WireGard 10-001 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Gray
Our Price: $4.36
Our Price: $4.47
Our Price: $4.95
WireGard 25-006 Twist-On Wire Connector PushGard 19-PC8 8-Port Push-In Connector WireGard 10-001 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Hex-Lok 25-2H2 Hex Lock Universal Wire Connector, 14 - 6 AWG, 600/1000 V, Thermoplastic, Gray Hex-Lok 25-1H1 Hex Lock Universal Wire Connector, 22 - 8 AWG, 600/1000 V, Thermoplastic, Tan GreenGard 25-095 Grounding Wire Connector, 14 - 10 SOL, Thermoplastic, Green
Our Price: $5.18
Our Price: $5.18
Our Price: $5.20
Hex-Lok 25-2H2 Hex Lock Wire Connector Hex-Lok 25-1H1 Hex Lock Wire Connector GreenGard 25-095 Grounding Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections.
WireGard 10-002 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Blue WingGard 25-089 Twist-On Wire Connector, 14 - 6 AWG, 300 V, 600 V, Thermoplastic, Blue 3M DBO/B-6 Underground Splice Kit, 600 V, 221 deg F
Our Price: $5.28
Our Price: $5.73
Our Price: $5.78
WireGard 10-002 Twist-On Wire Connector WingGard 25-089 Twist-On Wire Connector 3M DBO/B-6 Underground Splice Kit
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Designed to connect and moisture seal electrical connection for direct bury applications, 18-10 AWG, rated up to 600 volts. Combines the quick, reliable connection of a spring connector O/B with the moisture resistance of a high-impact, UV-resistant tube prefilled with moisture-resistant grease. For use with irrigation systems on golf courses, around business and for outdoor lighting systems. Application temperature range 32 - 120 degrees Fahrenheit. EU RoHS Compliant. Flame retardant. UL listed for direct bury.
WingGard 17-084 Twist-On Wire Connector, 22 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow WireGard 10-003 Twist-On Wire Connector, 22 - 14 AWG, 300 V, 600 V, Thermoplastic, Orange WingGard 17-086 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Red
Our Price: $6.04
Our Price: $6.21
Our Price: $6.82
WingGard 17-084 Twist-On Wire Connector WireGard 10-003 Twist-On Wire Connector WingGard 17-086 Twist-On Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WireGard 16-003 Twist-On Wire Connector, 22 - 14 AWG, 300 V, 600 V, Thermoplastic, Orange WingGard 10-084 Twist-On Wire Connector, 22 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow WireGard 10-004 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow
Our Price: $7.21
Our Price: $7.58
Our Price: $7.86
WireGard 16-003 Twist-On Wire Connector WingGard 10-084 Twist-On Wire Connector WireGard 10-004 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Gardner Bender 10-411 Crimp Sleeve Connector, 14 - 8 AWG, Zinc Plated Steel WireGard 16-002 Twist-On Wire Connector, 22 - 16 AWG, 300 V, Thermoplastic, Blue Gardner Bender 10-410 Crimp Sleeve Connector, 18 - 10 AWG, Zinc Plated Steel
Our Price: $8.20
Our Price: $8.37
Our Price: $9.42
Gardner Bender 10-411 Crimp Sleeve Connector WireGard 16-002 Twist-On Wire Connector Gardner Bender 10-410 Crimp Sleeve Connector
Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed.
Gardner Bender 10-410C Crimp Sleeve Connector, 18 - 10 AWG, Zinc Plated Steel WingGard 16-084 Twist-On Wire Connector, 22 - 10 AWG, 300 V, 600 V, Thermoplastic, Yellow Hex-Lok 10-2H2 Hex Lock Universal Wire Connector, 14 - 6 AWG, 600/1000 V, Thermoplastic, Gray
Our Price: $9.42
Our Price: $9.49
Our Price: $9.95
Gardner Bender 10-410C Crimp Sleeve Connector WingGard 16-084 Twist-On Wire Connector Hex-Lok 10-2H2 Hex Lock Wire Connector
Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WireGard 10-006 Twist-On Wire Connector, 18 - 10 AWG, 300 V, 600 V, Thermoplastic, Red PushGard 10-PC3 3-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Orange/Clear WingGard 10-086 Twist-On Wire Connector, 22 - 6 AWG, 300 V, 600 V, Thermoplastic, Red
Our Price: $10.16
Our Price: $10.42
Our Price: $10.53
WireGard 10-006 Twist-On Wire Connector PushGard 10-PC3 3-Port Push-In Connector WingGard 10-086 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Easy-Twist ET-CP-12 Combination Wire Connector Pail, Thermoplastic PushGard 10-PC4 4-Port Push-In Connector, 22 - 12 SOL, 600 V, Polycarbonate, Yellow/Clear Easy-Twist ET-CP-13 Combination Wire Connector Pail, 13 gal, Thermoplastic
Our Price: $10.53
Our Price: $11.18
Our Price: $11.37
Easy-Twist ET-CP-12 Combination Wire Connector Pail PushGard 10-PC4 4-Port Push-In Connector Easy-Twist ET-CP-13 Combination Wire Connector Pail
Standard wire connectors, compact design, sure-grip ribs. Flame retardant thermoplastic shell provides excellent electrical insulation. Threaded funnel entry guides the wires into the connector easily, pre-twisting of wires is not necessary. Square wire spring provides secure gripping of conductors. Deep skirt entry provides protection from flashover and shorts. Temperature rating 105 degrees C, 221 degrees F. 1,000 volt maximum in fixtures and signs. Contains 65 standard orange, 22-14 AWG, strip length 5/16", 45 standard yellow, 22-10 AWG, strip length 3/8", 30 standard red, 22-8 AWG, strip length 7/16",  40 winged tan, 22-8 AWG, strip length 9/16" Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Swept-back wing design, increases torque ability, makes twisting easier. Deep surface ridges provide a good grip. Flame retardant thermoplastic shell provides excellent electrical insulation. Threaded funnel entry guides the wires into the connector easily, pre-twisting of wires is not necessary. Square wire spring provides secure gripping of conductors. Deep skirt entry provides protection from flashover and shorts. Temperature rating 105 degrees C, 221 degrees F. 1,000 volt maximum in fixtures and signs. Contains: 60 - standard orange, 22-14 AWG, strip length 5/16", 45 winged tan 22-8 AWG, strip length 1/2", 50 winged yellow, 18-10 AWG, strip length 9/16" and 30 winged red, 18-8 AWG, strip length 5/8".
   
 
1 2