Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > CONDUIT STRAPS
We found 102 results matching your criteria.
Sort By:
1 2
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96163 2-Hole Snap-On Conduit Strap Halex 71212B 2-Hole Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 96111 1-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 96121 2-Hole Conduit Strap Halex 61220B 2-Hole Conduit Strap Halex 96780 Conduit Hanger
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 96151 1-Hole Snap-On Conduit Strap Halex 96122 2-Hole Conduit Strap Halex 96781 Conduit Hanger
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 71220B 2-Hole Conduit Strap Halex 96161 2-Hole Snap-On Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96112 1-Hole Conduit Strap Halex 96213 1-Hole Cable Strap
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel, use to secure BX cable to wood, masonry or similar surface.
Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Halex 96152 1-Hole Snap-On Conduit Strap Halex 96162 2-Hole Snap-On Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26125 2-Hole Conduit Strap Halex 26155 1-Hole Snap-On Conduit Strap Halex 61225 2-Hole Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26211 1-Hole Conduit Strap Halex 26210 1-Hole Service Entrance Strap Halex 26165 2-Hole Snap-On Conduit Strap
Steel, use to secure BX cable to wood, masonry or similar surface. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26153 1-Hole Snap-On Conduit Strap Halex 26163 2-Hole Snap-On Conduit Strap STRAP CBL 1HOLE SRVC ENT
Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 26126 2-Hole Conduit Strap Halex 26156 1-Hole Snap-On Conduit Strap Carlon E977LC-CAR Conduit Clamp
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26154 1-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Gardner Bender GCC-310 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 67860 Conduit Hanger Halex 26166 2-Hole Snap-On Conduit Strap Halex 26164 2-Hole Snap-On Conduit Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 61230 2-Hole Conduit Strap Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Gardner Bender GCC-410 2-Hole Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Gardner Bender GCC-120 2-Hole Conduit Strap Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
STRAP CBL 1HOLE OVAL SRVC ENT Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26141 Flat Drive Strap Gardner Bender GCC-610 2-Hole Conduit Strap Halex 26151 1-Hole Snap-On Conduit Strap
Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit.
Halex 61130 1-Hole Conduit Strap Halex 26152 1-Hole Snap-On Conduit Strap Halex 26142 Flat Drive Strap
Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed. Indoor or outdoor applications. To support EMT conduit. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Carlon E977DC25-UPC Conduit Clamp Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Drill  5/16'' hole with masonry bit and tap in with hammer. Drill  5/16'' hole with masonry bit and tap in with hammer.
   
 
1 2