Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
We found 40 results matching your criteria.
Sort By:
1
Halex 16010B Ground Clamp, 1/2 - 1 in, Zinc Alloy Gardner Bender GGS-1512R Ground Screw, 3/8 in Eritech CP58 Acorn Standard Duty Ground Clamp, 1/2 - 5/8 in, Silicone Bronze
Our Price: $1.68
Our Price: $1.97
Our Price: $2.31
Halex 16010B Ground Clamp Gardner Bender GGS-1512R Ground Screw Eritech CP58 Acorn Standard Duty Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Green round washer head screw for switch and outlet boxes. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
Gardner Bender GGC-1508 Ground Clip Eritech ZWP1J Grounding Pipe Clamp, 1/2 - 1 in, Die Cast Zinc Halex 93591 Ground Clamp, 1/2 in, Bronze
Our Price: $2.43
Our Price: $2.47
Our Price: $2.47
Gardner Bender GGC-1508 Ground Clip Eritech ZWP1J Grounding Pipe Clamp Halex 93591 Ground Clamp
For aluminum or copper grounding wire zinc plated. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. Connects grounding wire to the grounding rod.
Gardner Bender GGP-1502 Grounding Pigtail, 12 SOL Gardner Bender 14-GRC Ground Clamp, 1/2 - 1 in Halex 36010 Ground Clamp, 1/2 - 1 in, Bronze
Our Price: $2.71
Our Price: $2.93
Our Price: $3.22
Gardner Bender GGP-1502 Grounding Pigtail Gardner Bender 14-GRC Ground Clamp Halex 36010 Ground Clamp
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Eritech CWP1J Grounding Pipe Clamp, 1/2 - 1 in, Silicone Bronze Halex 93592 Ground Clamp, 5/8 in, Bronze Halex 36019 Ground Clamp, 1/2 - 1 in, Bronze
Our Price: $3.76
Our Price: $4.28
Our Price: $5.18
Eritech CWP1J Grounding Pipe Clamp Halex 93592 Ground Clamp Halex 36019 Ground Clamp
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Eritech CWP1JU Grounding Pipe Clamp, 1/2 - 1 in, Silicone Bronze Square D PK7GTACP Ground Bar Kits, Aluminum, 7 Terminals Halex 63299 Ground Screw, NO 10-32 x 1/2 in, Steel
Our Price: $5.49
Our Price: $5.50
Our Price: $6.48
Eritech CWP1JU Grounding Pipe Clamp Square D PK7GTACP Ground Bar Kits Halex 63299 Ground Screw
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug, 15 Terminal, 14 - 4 AWG Copper/Aluminum Schneider PK9GTACP Ground Bar Kit, 30 - 400 A, 9 Terminal, Aluminum/Copper Square D PK12GTACP Ground Bar Kits, Aluminum, 12 Terminals
Our Price: $6.91
Our Price: $7.02
Our Price: $7.08
Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Schneider PK9GTACP Ground Bar Kit Square D PK12GTACP Ground Bar Kits
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Cutler-Hammer GBK10P Ground Bar Kits, 10 Terminals Eritech EK17 Direct Burial Perpendicular Ground Clamp, 1/2 - 1 in, Bronze Alloy Eritech 811260UPC Grounding Rod, 1/2 in Dia x 6 ft L, Steel, Galvanized
Our Price: $7.11
Our Price: $7.31
Our Price: $7.36
Cutler-Hammer GBK10P Ground Bar Kits Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech 811260UPC Grounding Rod
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
Halex 36020 Ground Clamp, 1-1/4 - 2 in, Bronze Cutler-Hammer GBK14P Ground Bar Kits, 14 Terminals Square D PK15GTACP Ground Bar Kits, Aluminum, 15 Terminals
Our Price: $7.80
Our Price: $8.13
Our Price: $8.14
Halex 36020 Ground Clamp Cutler-Hammer GBK14P Ground Bar Kits Square D PK15GTACP Ground Bar Kits
Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Schneider PK18GTACP Ground Bar Kit, 30 - 400 A, 18 Terminal, Aluminum/Copper Erico 815860UPC Grounding Rods, Galvanized, 5/8 Inch Dia. x 6 Ft Erico CC58 Threadless Compression Coupler, Silicon Bronze
Our Price: $8.25
Our Price: $8.42
Our Price: $8.60
Schneider PK18GTACP Ground Bar Kit Erico 815860UPC Grounding Rods Erico CC58 Threadless Compression Coupler
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the two parts compress to form a conductive connection.
Siemens Energy ECGB10 Ground Bar Kits, 10 Taps Square D PK23GTACP Ground Bar Kits, Aluminum, 23 Terminals Eritech 615840UPC Grounding Rod, 5/8 in Dia x 4 ft L, Copper
Our Price: $8.68
Our Price: $8.72
Our Price: $8.97
Siemens Energy ECGB10 Ground Bar Kits Square D PK23GTACP Ground Bar Kits Eritech 615840UPC Grounding Rod
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug, 30 Terminal, 14 - 4 AWG Copper/Aluminum Eritech 815880UPC Grounding Rod, 5/8 in Dia x 8 ft L, Steel, Galvanized Eritech CWP2J Grounding Pipe Clamp, 1/4 - 1 in, Silicone Bronze
Our Price: $9.21
Our Price: $9.35
Our Price: $9.84
Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug Eritech 815880UPC Grounding Rod Eritech CWP2J Grounding Pipe Clamp
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Eritech 611380UPC Grounding Rod, 1/2 in Dia x 8 ft L, Copper Gardner Bender GGP-1261 Grounding Pigtail, 12 SOL Eritech 615880UPC Grounding Rod, 5/8 in Dia x 8 ft L, Copper
Our Price: $11.06
Our Price: $12.86
Our Price: $13.25
Eritech 611380UPC Grounding Rod Gardner Bender GGP-1261 Grounding Pigtail Eritech 615880UPC Grounding Rod
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. AWG number 12 solid wire. 6-1/2" long with captured screw, other end stripped. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Erico IBTB Intersystem Bonding Termination, Polymeric Eritech EDS58 Drive Sleeve, For Use With Ground Rod, Copper Bonded Steel Erico 615800UPC Grounding Rods, Copperbonded, 5/8 Inch Dia. x 10 Ft
Our Price: $13.33
Our Price: $14.32
Our Price: $20.20
Erico IBTB Intersystem Bonding Termination Eritech EDS58 Drive Sleeve Erico 615800UPC Grounding Rods
Intersystem bonding termination for residential and small commercial facilities. Meets the requirements of 2008 NEC Article 250.94.  Accommodates (5) 14 - 2 AWG bonding conductors and (1) 6 - 2 AWG grounding electrode conductor. Integral mounting base for easy installation. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL requirements for weatherability performance. Includes corrosion-resistant, stainless steel mounting hardware. Connects to grounding electrode conductor - does not rely on meter base enclosure bonding connection. 1.41" depth x 2.01" width x 4.5" length. cULus Listed. The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Grounding Clips - Case of 100
Our Price: $38.00
Raco 975 Ground Clip
For grounding switch and outlet boxes using non-metallic sheathed cables from No. 14 to No. 10.
   
 
1