Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES > SPECIALTY BOXES
We found 14 results matching your criteria.
Sort By:
1
Carlon E970CD-CTN Rigid Round Conduit Body with Cover Carlon E970CE-CTN Rigid Round Conduit Body with Cover Thomas & Betts E989NNJ-CAR Rigid Junction Box
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
Thomas & Betts E365DR Type T Switch Box Carlon E987RR Rigid Junction Box Raco Wiegmann SC060604RC Pull Box Enclosure
Nonmetallic threaded switch box with five 1/2" threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4" diameter. 13.5 cubic inch capacity. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29. Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
Raco Wiegmann SC080804RC Pull Box Enclosure Carlon E971FB-CAR Floor Base Box Thomas & Betts B121BFBRR Adjustable Floor Box
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish. Non-metallic PVC floor box. Water tight gasket and corrosion resistant hardware. Concrete or wood subfloor construction approved. Minimum concrete dept required is 3-1/2". Will provide optional low voltage divider permitting three services (data, telephone, and power) access. Accepts 1/2", 3/4" and 1" conduit and has PVC molded ports. Includes two 1" x 3/4", two 3/4" x 1/2" reducer plugs and two 1" and 3/4" hubs. 90 cubic inch capacity. Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0" to 1-7/8", 21 cubic inch capacity. UL Listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
Cooper TR5797 Tamper Resistant Floor Box Receptacle Carlon E971FBDI-2 Electrical Box Carlon E989R Rigid Junction Box
Includes box, gasket, receptacle, brass cover plate and closure cap with rubber "O" ring. Can be used in industrial and residential environments. UL Listed. Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
Carlon E97BRR Electrical Box Kit Raco 6224 Electrical Box
Flush floor mount, for duplex or GFCI receptacle, used with Carlon floor box  E971FB. Solid brass cover, plastic adapter ring, gasket and everything needed for installation is included. (Receptacle sold separately). Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2" bottom knockout, 18.5 cubic inch capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable for carpet, tile or wood floor applications. Mop water tight. If floor covering is used, discard included brass tile flange and replace with RACO 6235 carpet flange. Includes: box, brass duplex lift lid cover, and brass tile flange. Receptacle not included. UL Listed. 4.19" diameter.
   
 
1